Combo Unit, Buy America Compliant (BAA), Damp Location, Self-Testing, Title 20, Sealed Lead Acid (SLA) Products (2 items)
Exit sign/emergency light combo units
Combo exit signs are devices that combine an exit sign and emergency lights in one unit. They are used to indicate the direction of the nearest exit and provide illumination in case of a power outage or emergency situation. Combo exit signs are required by building codes and fire safety regulations in many public and commercial buildings, such as apartment buildings, medical facilities, restaurants, schools, hotels, and offices.
Combo exit signs can be mounted on the wall, ceiling, or side of a building, depending on the layout and design of the space. They come in different colors, shapes, and sizes to suit various preferences and needs.
Combo exit signs are energy-efficient, durable, and easy to install. They have a battery backup feature that allows them to operate for at least 90 minutes in the event of a power failure.
Combo exit signs are an essential safety device that can help people find their way out of a building quickly and safely in an emergency.
Assembled In America exit signs & emergency lights
Products displaying an 'Assembled in the USA' label will contain a percentage of imported components but will be physically assembled in America and are compliant with the Buy American Act (BAA). The FTC states that Assembled in America products must have undergone a significant transformation on American soil.
A damp location is an interior location normally subject to dampness or condensation, or an exterior location protected from weather and not subject to saturation with water. Damp locations include over bathtubs, indoor pools, covered porches, and like locations.
Self-Diagnostics/Self-Testing exit signs & emergency lights
This feature may be added to many exit sign and emergency light fixtures, the SDT feature prolongs battery life, and reduced man hours required OSHA tests. Self testing diagnostic automatically executes a 15 minute test every 30 days and runs a 90 minutes test once per year. The major reasons batteries typically fail is because they remain dormant for long periods of time. With the SDT feature automatically simulates a full discharge and full recharge to keep the batteries in peak performance. If any problems arise during this testing process it will report them through the user interface. This benefit drastically reduces man hours required by OSHA to manually perform the tests.
What is Title 20?
Title 20 is part of the CEC's Appliance Efficiency Regulation and California Code of Regulations that requires
manufacturer certification of "self-contained” lighting control devices in California.
"Self-contained” lighting control devices are defined as discrete lighting control devices that can perform their
designed function without the requirement of being connected to additional devices.
Common devices that may fall under the category of "Self-contained” include:
- Self-contained Automatic Daylighting Controls
- Line powered Occupancy Sensors
- Line power Vacancy Sensors
Sealed lead acid (SLA) batteries
Sealed lead acid batteries are sometimes referred to as VRLA (valve regulated lead acid) and there are two primary types AGM and Gel. We offer both AGM and Gel batteries, each has its advantages over the other depending on the specific application. SLA batteries usually last between 3 to 5 years with typical usage. The optimum operating temperature for the lead-acid battery is 25°C (77°F). Elevated temperature reduces longevity. As a guideline, every 8°C (15°F) rise in temperature cuts the battery life in half.
Please call us at 763-292-5485 to speak with an expert, or email email@example.com to receive a quote.