5.00/1 Customer Review
Beghelli Curva Swivel Edge-Lit Exit Sign product variations
Exit Signs
Exit signs save lives in case of fire or disaster. If your building loses power, exit signs with battery backup can guide people to safety. We sell a variety of exit signs to comply with building fire & insurance codes. If you are looking for a heavy duty wet location exit sign for outdoor placement or just looking to save some money with an energy efficient LED exit sign, we have it for you.
White
The main housing of these exit signs and emergency lights is painted white or made from a white thermoplastic.
3.6 Volt
Federally approved high temperature, top selling exit sign and emergency lighting 3.6 Volt NiCd batteries. A 3.6 Volt NiCd has three AA, AAA, C, Sub-C, D or F cells in a battery pack that can come in nested(triangle), row, stick or smoke stack configurations.
Nickel-Cadmium (NiCd)
The nickel–cadmium battery is a type of rechargeable battery using nickel oxide hydroxide and metallic cadmium as electrodes. The abbreviation NiCd is derived from the chemical symbols of nickel and cadmium. NiCd batteries have a longer shelf life of around 10 years. The NiCd batteries sold on this site are High Temperature NiCds batteries with outstanding charge/discharge characteristics at both room temperature and high temperature up to 70°C (158°F).
Warning: Batteries, battery terminals, and related accessories can expose you to chemicals including Cadmium and Cadmium compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to https://www.p65warnings.ca.gov.
Red
Red letters are required for New York City and Chicago approved exit signs.
Green
Green letters are typically used in theater exit signs.
Damp Location
A damp location is an interior location normally subject to dampness or condensation, or an exterior location protected from weather and not subject to saturation with water. Damp locations include over bathtubs, indoor pools, covered porches, and like locations.
Aluminum
Brushed die-cast aluminum housings provide a modern appearance with ultimate functionality.
New York City Approved
New York City has very specific codes regarding emergency lighting and signage. In short New York City approved exit signs must be Red 8 inch tall letters with a 1 inch stroke (line thickness) as opposed to 6 inch tall with a 3/4 inch stroke in typical exit signs.
Recessed Mount
Recessed mounted exit signs or emergency lights offer a low-profile installation by hiding the housing, which includes the electrical components of the exit sign in the ceiling.
Edge-lit
An edge-lit exit sign or an edge-lit stairs sign is a type of sign that uses LEDs to illuminate a clear acrylic panel with the word EXIT or STAIRS printed on it. The LEDs shine on the edges of the panel, making the word and the arrows (if any) stand out. The rest of the panel appears transparent or mirrored, giving a sleek and modern look to the sign. Edge-lit signs are often used in places where aesthetics are important, such as hotels, restaurants, or offices. Edge-lit signs are also energy-efficient, durable, and easy to install and maintain.
LED Lighting
Visibility, brightness and long life are very important factors that should be thought about when purchasing and exit sign. Light emitting diode or LED exit signs & emergency lights have proven to be successful in the reducing electricity consumption by up to 85%. LED exit signs can save money and power while still emitting considerable amounts of light.
Battery Backup
An emergency light with battery backup capability switches to emergency operation in the event of a power loss to illuminate escape routes and safety equipment.
Ceiling Mount
These products can be hung from the ceiling. Many exit signs come with the ceiling mounting canopy included.
Surface/Wall Mount
Exit signs & emergency lights that are surface mountable are typically one sided and have a back plate that can be connected directly to a wall or flat surface.
AC Only
AC only exit signs do not include a battery backup or charging circuitry and are for installation and use only where emergency power is supplied from a remote or secondary AC power supply.
Architectural
Architectural lighting is designed to be a highly functional style of lighting in spaces where light fixtures are needed to serve a fundamental purpose, such as providing focused downlight or accenting certain areas of a room. Often thought of as a practical type of lighting, these fixtures are not usually given credit for their decorative character and ability to add undeniable style to a lighting project.
Commercial
Commercial lighting is lighting used for commercial spaces such as offices, stores, institutions, hospitals and government buildings, essentially those spaces that are not residential, industrial or for manufacturing.
Industrial
Industrial modern blends the urban edge of utilitarian design with the warmth of aged woods and worn textures. Lighting utilize aged iron and metals with rich patinas, accented by weathered woods and soft neutral surfaces.