5.00/1 Customer Review
Isolite HZC Series Hazardous Location NEMA 4X Combo product variations
Exit Signs
Exit signs save lives in case of fire or disaster. If your building loses power, exit signs with battery backup can guide people to safety. We sell a variety of exit signs to comply with building fire & insurance codes. If you are looking for a heavy duty wet location exit sign for outdoor placement or just looking to save some money with an energy efficient LED exit sign, we have it for you.
Sealed Lead Acid (SLA)
Sealed lead acid batteries are sometimes referred to as VRLA (valve regulated lead acid) and there are two primary types AGM and Gel. We offer both AGM and Gel batteries, each has its advantages over the other depending on the specific application. SLA batteries usually last between 3 to 5 years with typical usage. The optimum operating temperature for the lead-acid battery is 25°C (77°F). Elevated temperature reduces longevity. As a guideline, every 8°C (15°F) rise in temperature cuts the battery life in half.
Nickel-Cadmium (NiCd)
The nickel–cadmium battery is a type of rechargeable battery using nickel oxide hydroxide and metallic cadmium as electrodes. The abbreviation NiCd is derived from the chemical symbols of nickel and cadmium. NiCd batteries have a longer shelf life of around 10 years. The NiCd batteries sold on this site are High Temperature NiCds batteries with outstanding charge/discharge characteristics at both room temperature and high temperature up to 70°C (158°F).
Warning: Batteries, battery terminals, and related accessories can expose you to chemicals including Cadmium and Cadmium compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to https://www.p65warnings.ca.gov.
6 Volt
6 volt rechargeable batteries are a type of battery that can be recharged and used multiple times. They are commonly used for devices that require a low voltage and a high current, such as game feeders, lanterns, emergency lights, and electric signs. 6 volt rechargeable batteries have several advantages over disposable batteries, such as saving money, reducing waste, and preventing short-circuiting.
There are different types of 6 volt rechargeable batteries, such as Sealed Lead Acid (SLA), lithium iron phosphate (LiFePO4), nickel metal hydride (NiMH) and Nickel-Cadmium (NiCD). Each type has its own characteristics, such as capacity, cycle life, weight, and price. For example, SLA batteries are cheap and durable, but heavy and bulky. LiFePO4 batteries are lightweight and long-lasting, but expensive and sensitive to overcharging. NiMH batteries are eco-friendly and high-performance, but prone to self-discharge and memory effect. Depending on the application and preference, users can choose the best type of 6 volt rechargeable battery for their needs.
12 Volt
Rechargeable batteries are batteries that can be recharged and reused multiple times. They are more environmentally friendly and cost-effective than disposable batteries. One of the most common types of rechargeable batteries is the 12 volt battery, which is often used in backup power supplies, LED lights, CCTV cameras, and other devices that require a steady and reliable power source.
12 volt rechargeable batteries come in different sizes, capacities, and chemistries. Some of the most popular chemistries are sealed lead acid (SLA), lithium ion (Li-ion), and lithium iron phosphate (LiFePO4). Each chemistry has its own advantages and disadvantages, such as weight, lifespan, performance, and safety. For example, SLA batteries are heavy and have a short cycle life, but they are cheap and easy to maintain. Li-ion batteries are light and have a high energy density, but they are expensive and prone to overheating. LiFePO4 batteries are stable and have a long cycle life, but they are costly and have a lower voltage than other lithium batteries.
Red
Red letters are required for New York City and Chicago approved exit signs.
Green
Green letters are typically used in theater exit signs.
Wet Location
Wet Location emergency lights and exit signs are weatherproof and designed to be used in outdoor environments, as well as indoor locations that are exposed to water and moisture. Wet location emergency lights and exit signs are extremely durable and long-lasting.
Custom Wording
Custom wording exit signs or signage can increase safety in the work place. Point people to the proper emergency location or areas to avoid when hazardous equipment is in use. Add your custom wording during the checkout process or call us at 763-542-3155 to place your order.
Self-Testing
This feature may be added to many exit sign and emergency light fixtures, the SDT feature prolongs battery life, and reduced man hours required OSHA tests. Self testing diagnostic automatically executes a 15 minute test every 30 days and runs a 90 minutes test once per year. The major reasons batteries typically fail is because they remain dormant for long periods of time. With the SDT feature automatically simulates a full discharge and full recharge to keep the batteries in peak performance. If any problems arise during this testing process it will report them through the user interface. This benefit drastically reduces man hours required by OSHA to manually perform the tests.
LED Lighting
Visibility, brightness and long life are very important factors that should be thought about when purchasing and exit sign. Light emitting diode or LED exit signs & emergency lights have proven to be successful in the reducing electricity consumption by up to 85%. LED exit signs can save money and power while still emitting considerable amounts of light.
Combo Unit
Combo exit signs are devices that combine an exit sign and emergency lights in one unit. They are used to indicate the direction of the nearest exit and provide illumination in case of a power outage or emergency situation. Combo exit signs are required by building codes and fire safety regulations in many public and commercial buildings, such as apartment buildings, medical facilities, restaurants, schools, hotels, and offices.
Combo exit signs can be mounted on the wall, ceiling, or side of a building, depending on the layout and design of the space. They come in different colors, shapes, and sizes to suit various preferences and needs.
Combo exit signs are energy-efficient, durable, and easy to install. They have a battery backup feature that allows them to operate for at least 90 minutes in the event of a power failure.
Combo exit signs are an essential safety device that can help people find their way out of a building quickly and safely in an emergency.
Battery Backup
An emergency light with battery backup capability switches to emergency operation in the event of a power loss to illuminate escape routes and safety equipment.
NEMA4X Rated
NEMA rated enclosures are intended for indoor or outdoor use primarily to provide a degree of protection against the entry of water during prolonged submersion at a limited depth. NEMA 12 enclosures are designed to prevent the ingress of dust, water, and oil.
Hazardous Location
Hazardous location exit signs and emergency lights are designed to operate in hostile environments that would damage ordinary signs and lights. Constructed from corrosion resistant materials, some units offer sealed enclosures that can be used in outdoor environments or areas subject to water spray, moisture and extreme temperature conditions.
Surface/Wall Mount
Exit signs & emergency lights that are surface mountable are typically one sided and have a back plate that can be connected directly to a wall or flat surface.
Architectural
Architectural lighting is designed to be a highly functional style of lighting in spaces where light fixtures are needed to serve a fundamental purpose, such as providing focused downlight or accenting certain areas of a room. Often thought of as a practical type of lighting, these fixtures are not usually given credit for their decorative character and ability to add undeniable style to a lighting project.
Commercial
Commercial lighting is lighting used for commercial spaces such as offices, stores, institutions, hospitals and government buildings, essentially those spaces that are not residential, industrial or for manufacturing.
Industrial
Industrial modern blends the urban edge of utilitarian design with the warmth of aged woods and worn textures. Lighting utilize aged iron and metals with rich patinas, accented by weathered woods and soft neutral surfaces.
Residential
Beautiful and stylish residential lighting.