The AFF Affinity® Premium Die-Cast Architectural Emergency Light is ideal for applications requiring low-profile, attractive emergency lighting with Optional normally-off or normally-on with photocell control. Provides a minimum of 90 minutes of
illumination both indoors and outdoors upon loss of AC power. Certain airborne contaminants can
diminish the integrity of acrylic and/or polycarbonate. Click here for Acrylic-Polycarbonate
Compatibility table for suitable uses.
CONSTRUCTION — Compact, low-profile, architectural design with die-cast aluminum housing.
Finishes are texturized powder coat paint for dark bronze, white, black and non-texturized for natural
aluminum. Test switch indicator light and remote enabled are located on the bottom of the housing and
are easily accessible and visible from the floor.
OPTICS —LEDs with L70 of 55,000 hours. Delivers 635 lumens in Normal-On and Emergency operation.
Optional field configurable for wide and forward throw distribution (US Patent Pending). Outdoor wide
throw distribution: 70' (3' path of egress) at a 7.5' mounting height with 1 FC Average.
4,000K correlated color temperature (CCT).
- UVOLT (120 thru 347V, 50/60hz). Current-limiting charger maximizes battery life and
minimizes energy consumption to provide low operating costs.
- Small battery chargers Certified in the
CA Title 20 Appliance Efficiency Database
Short-circuit protection — current-limiting charger circuitry protects printed circuit board from shorts.
Regulated charge voltage maintains a stable charge voltage over a wide range of line voltages.
- Prevents over/undercharging that shortens battery life and reduces capacity. Filtered charger input
minimizes charge voltage ripple and extends battery life.
- Photocell option (PEL) for normally on product in order to discontinue illumination during periods when
ambient light is present.
BATTERY: Sealed, maintenance-free Lithium Iron Phosphate battery.
SELF-DIAGNOSTICS AND REMOTE TEST (SDRT OPTION): Automatic 24-hour recharge after a
90-minute discharge. Advanced electrical design provides constant light output throughout the entire
discharge period for non-CW batteries. (For cold weather and cold temperature applications, the light
may diminish though the discharge cycle). Brownout protection is automatically switched to emergency
mode when supply voltage drops below approximately 80 percent nominal of 120, 220, 277 or 347. Other
input voltages may vary. AC/LVD re-set allows battery connection before AC power is applied and prevents
battery damage from deep discharge.
Self-Diagnostics: Continuously monitors AC functionality. Standard derangement monitoring will
indicate disconnected battery, charger failure and displays green flashing indicator light while in
emergency mode. Single multi-chromatic LED indicator to display two-state charging, test activation
and three-state self-diagnostics.
Self-diagnostic testing: Five minutes every 30 days and 90 minutes annually. Diagnostic evaluation
of lamps, AC to DC transfer, battery charging and condition of microprocessor. Automatic test is easily
postponed for eight hours by activating manual test switch or use of remote tester (RTKIT accessory).
Manual testing: Test switch and remote tester (RTKIT accessory) provides manual activation of 60-second
diagnostic testing for on-demand visual inspection. 90 minute manual testing can be enabled by pressing
the test switch again while in test mode.
Wall mount: typically meets 7.5' to 14' mounting height from ground or floor. Power
supplied by either mounting directly to a 4" square or 4" octagon j-box (wall mount) and accepts rigid
or flex conduit.
UL wet location listed standard at 32-122°F (0-50°C). Unit with CW battery(cold weather)
listed for -22°F to 122°F (-30° to 50°C). Remote listed for -40°F to 122°F (-40° to 50°C). Meets or exceeds
all applicable requirements for UL 924, NFPA 101 (current Life Safety code), NFPA 70 (NEC), NOM (Norma
Oficial Mexicana), California Energy Commission Title 20 section 1605.3 (W)(4), FCC Title 47, Part 15,
Subpart B and OSHA. List and labeled to comply with Canadian Standards C22.2 No. 141-10.
5-year limited warranty
Depending on the product options you selected this item may need to be quoted to get a final price. We will contact you before processing the order if there is a price change.