RTA Round Tampered Steel Light Pole

FEATURES & SPECIFICATIONS

INTENDED USE —

These specifications are for USA standards only. RTS poles are not to be utilized for Sportslighting applications requiring use of crossarms to mount luminaires. SPRTS series poles are the correct pole type for Sportslighting projects and are designed to be configured as a complete assembly with the desired crossarm(s) incorporated within the pole nomenclature description.

CONSTRUCTION —

Pole Shaft: The pole shaft is of 11-gauge (0.120"), 7-gauge (0.179") or, 3-gauge (0.239") with a uniform wall thickness and is made of a weldable-grade (ASTM A-595 Grade A or A572 Grade 55), hot-rolled, commercial-quality carbon steel tubing with a minimum yield of 55,000 psi. Shaft is one-piece construction with a full-length longitudinal high-frequency electric resistance weld and round in cross-section having a uniform linear taper of 0.14" per foot.

Pole Top: Options include tenon top, drilled for side mount fixture, tenon with drilling (includes extra handhole) and open top. Side drilled and open top poles include a removable steel top cap with set screws.

Handhole: A reinforced handhole with grounding provision is provided at 18" from the base end of the pole assembly on side A. Every handhole includes a cover and cover attachment hardware. 3" x 5" rectangular handhole is provided on pole with 5.9" diameter. Pole shaft with diameters greater than 5.9" are provided with a 4" x 6.5" oval shaped handhole.

Base Cover: A two-piece ABS plastic full base cover is provided with each pole assembly on pole shaft diameters of 9" or less. Shaft sized greater than 9" have a sheet steel two-piece base cover. Additional base cover options are available upon factory request. Bolt cover caps can be substituted on most pole shaft sizes. Options include heavy duty two-piece cast aluminum full base cover and bolt cover caps. All base covers and bolt cover caps are finished to match pole.

Anchor Base/Bolts: Anchor base is fabricated from hot-rolled carbon steel plate that conforms with ASTM A36. Anchor bolts are manufactured to ASTM F1554 Standards Grade 55, (55 KSI minimum yield strength and tensile strength of 75-95 KSI). Upper portion of anchor bolt is galvanized per ASTM A-153; bolts have an "L” bend on bottom end and are galvanized a minimum of 12" on the threaded end. Each hot-dipped galvanized anchor bolt is furnished with two hex nuts and two flat washers.

HARDWARE —

All structural fasteners are high-strength galvanized carbon steel. All non-structural fasteners are galvanized or zinc-plated carbon steel, or stainless steel.

FINISH —

Extra durable painted finish is coated with TGIC (Triglycidyl Isocyanurate) Polyester powder that meets 5A and 5B classifications of ASTM D3359. Powder-coat finishes include Dark Bronze, White, Black, and Natural Aluminum colors. Architectural Colors and Special Finishes are available by quote and include, but are not limited to Paint over Hot-dipped Galvanized, RAL Colors, Custom Colors and Extended Warranty Finishes.

BUY AMERICAN ACT —

Product with the BAA option is assembled in the USA and meets the Buy America(n) government procurement requirements under FAR, DFARS and DOT regulations. Please refer to www.acuitybrands.com/buy-american for additional information.

INSTALLATION —

Do not erect poles without having fixtures installed. Factory-supplied templates must be used when setting anchor bolts. Lithonia Lighting will not accept claim for incorrect anchorage placement due to failure to use Lithonia Lighting factory templates. If poles are stored outside, all protective wrapping must be removed immediately upon delivery to prevent finish damage. Lithonia Lighting is not responsible for the foundation design.

WARRANTY —

1-year limited warranty. This is the only warranty provided and no other statements in this specification sheet create any warranty of any kind. All other express and implied warranties are disclaimed. Complete warranty terms located at: www.acuitybrands.com/support/warranty/terms-and-conditions