VEL-VELS Concealed Emergency Light

   5.00/1 Customer Review

VEL-VELS Concealed Emergency Light
The VEL-VELS provides a minimum of 90-minutes of illumination for the rated wattage upon the loss of AC power. Ideal for applications that require ensconced emergency lighting in wall or ceiling.








As Configured:
VEL

Option Guide
  1. For extended run-time information, see chart on reverse side.
  2. Not available with H1212 lamps.
  3. Not available with H1212 or H2012 lamps.
  4. Two lamps provided. Total lamp load cannot exceed the fixture capacity rating.
  5. VEL rough-in section ships standard with fixture unless LRIS suffix is specified. The rough-in section ships in a separate carton. Requires ELA VEL RIS accessory for installation.
  6. Must designate CP option for CCEA rating.
  7. Minimum one per job required for remote testing.

Attention: Depending on the product options you selected this item may need to be quoted to get a final price. Pricing is changing faster than we can update some products. We will contact you before processing your order if there is a price change.

Base SKU: VEL
Weight: 8 lb
Provides a minimum of 90-minutes of illumination for the rated wattage upon the loss of AC power. Ideal for applications that require ensconced emergency lighting in wall or ceiling.
 
CONSTRUCTION 
Trim and door panels finished in durable white textured powder coated paint. Can be wall papered or field painted. Trim and panel doors lay flush with mounting surface. No exposed hardware. Low profile recessed test switch and status indicator configuration minimizes exposed interfaces. Rugged, 20 GA galvanized steel box with three 3/4" knock-outs. Galvanized bar hangers span up to 30" on center. Vertically adjustable bar hangers allows for flush mounting of trims to ceiling face, accommodates ceiling or walls up to 5/8" thick.
 
OPTICS 
VEL: Two MR16 halogen 12W to 75W lamps.
VELS: Two MR11 25W lamps.
180° side-to-side.
Lamps are ensconced until activated in the emergency mode.
Models with additional wattage capacity are provided with fused remote output leads.
90° down-and-out, relative to mounting height. Lamps are ensconced until activated in the emergency mode. Models with additional wattage capacity are provided with fused remote output leads.
 
ELECTRICAL 
Dual-voltage input capability (120/277V).
Precision-controlled motor ensures reliable extraction and retraction of light sources. Single, multi-chromatic LED indicator to display two-state charging, test activation and four-state diagnostic status.
Test switch provides manual activation of 30-second diagnostic testing for on-demand visual inspection.
Self-diagnostics is provided as a standard feature. The diagnostic feature tests the unit once every 28 days by opening the doors for 1 second and then closing them, without turning the lamps on. Following this, a load test will be performed for 29 minutes checking for lamp, battery or transfer default. The charger function is monitored continuously.
Diagnostic evaluation of lamp, AC to DC transfer, charging and battery condition. Continuously monitors AC functionality.
IR receiver is provided as a standard feature. Requires the ELA RTVEL hand-held remote transmitter for remote testing (see accessories) for operation. Selectable 30-second or 90-minute manual testing.
Battery: VEL: Sealed, maintenance-free lead-calcium battery with capacity of 24W to 150W for a minimum of 90-minutes of emergency operation. Optional nickel-cadmium battery.
VELS: Sealed, maintenance-free lead-calcium battery with capacity of 50W for a minimum of 90-minutes of emergency operation. Optional nickel-cadmium battery.
VEL: Extended run times available. (See chart on reverse side.)
Automatically recharges after a 90-minute discharge.
Low voltage disconnect prevents excessively deep discharge that can permanently damage the battery.
Voltage polarity protected connector for reverse polarity protection.
 
INSTALLATION
Wall or ceiling mount. Exposed or concealed suspension ceiling systems.
T-bar clips secure unit to grid in ceiling-mount applications.
VEL: Rough-in dimensions: 13-1/2" x 6-3/4". Allow 5-1/2" for door panel opening clearance.
VELS: Rough-in dimensions: 5-1/2" x 5-1/4". Allow 2" for door panel opening clearance.
Back box dimensions: 5-1/2” W x 15-3/8” L x 4” D.
 
LISTINGS
UL Listed. Non-IC recessed mounting. Meets UL 924, NFPA 101, NFPA 70-NEC and OSHA illumination standards. Available with CP option for City of Chicago Environmental Air (CCEA) requirements.
 
WARRANTY
3-year limited warranty.

Attention: Depending on the product options you selected this item may need to be quoted to get a final price. Pricing is changing faster than we can update some products. We will contact you before processing your order if there is a price change.

Qty:
$1,506.25




Lithonia VEL-VELS Concealed Emergency Light product variations