ZX Explosion-proof Emergency Light

The ZX 6 and 12 Volt explosion-proof emergency light suitable for use in hazardous location areas.

Series^1,2 (Required): Please Select 6 Volt/14 watts | 614N 6 Volt/28 watts | 628N (+ $60.00) 12 Volt/ 50 watts | 1250N (+ $591.00)
Options: None Key lock | KLD (+ $797.00) Time delay 120 VAC | TD1 (+ $142.50) Time delay 277 VAC | TD2 (+ $142.50)
Assembled in America: No Yes | BAA

As Configured:

Attention: Depending on the product options you selected this item may need to be quoted to get a final price. Pricing is changing faster than we can update some products. We will contact you before processing your order if there is a price change.

Base SKU: ZX
Weight: 67 lb

The ZX 6 and 12 Volt explosion-proof emergency light suitable for use in Class I, Div. I, Groups C & D, Zones 0, 1 & 2, Groups IIA, IIB + H2 & IIC; Class I, Div. 2, Groups C & D, Zone 2, Groups IIA, IIB + H2 & IIC; Class II, Div.1, Groups E, F & G; Class II, Div. 2, Groups F & G and Class III hazardous location areas.

 

CONSTRUCTION

Copper-free cast-aluminum enclosure withstands explosions generated by internal arc without propagating them into the hazardous atmosphere.

 

Enclosure and cover constructed separately. Threaded cover allows easy attachment or removal. Enclosure has three threaded openings for 3/4" rigid conduit — one for AC input and two for mounting hazardous fixtures.

 

All lamps heads and remotes must be ordered and shipped separately.

 

ELECTRICAL

120/277 VAC dual-voltage input with surge-protected, solid-state charging circuitry.

 

Low-voltage disconnect (LVD) feature disconnects battery prior to unacceptable deep discharge, but not before required 90-minute emergency operation.

 

AC lockout feature prevents battery drain prior to energizing of utility power. Wiring and electrical connections can be completed without energizing the emergency circuit.

 

Brownout protection circuitry automatically switches unit into emergency mode if utility voltage drops below 20% of nominal. Battery charging circuitry utilizes constant-current charger for nickel-cadmium battery units.

 

Battery recharge time after full discharge less than required by UL 924 standard.

 

Sealed, maintenance-free nickel-cadmium battery providing 90-minute emergency operation at full light output.

 

INSTALLATION

Wall mount only.

 

LISTINGS

UL Listed. Meets UL 924, 844, 1203, 1604, NFPA 70, NFPA 101, NEC and OSHA illumination standards.

 

WARRANTY

3-year limited warranty.

Attention: Depending on the product options you selected this item may need to be quoted to get a final price. Pricing is changing faster than we can update some products. We will contact you before processing your order if there is a price change.

Product Files